WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Vamo V5 VV / VW Mod Starter Kit

$79.99 $29.99
(You save $50.00)

Vamo V5 VV / VW Mod Starter Kit

$79.99 $29.99
(You save $50.00)
15.00 Ounces

Product Description

Are you ready to step up into the world of APVs (advanced personal vaporizers) and mods?  The Vamo V5 starter kit is a perfect all-in-one package for one of the best performing and most highly regarded regulated mods available!  The telescoping Vamo line has long been popular among vapers due to its high performance, rugged durability, and wide feature array, and the 5th version only keeps getting better.

The V5 features the classic Vamo styling with a number of enhancements including:

  • Vamo V3 PCB chipset - for the ultimate performance and vaping experience
  • New OLED display for a crisp, clear readout of your settings
  • Removable top cap - when using eGo threaded setups, you may want to remove the top cap.  Also makes for easy cleaning!

What makes the Vamo V5 stand out from other APVs on the market?  First of all is the operating range - the Vamo V5 can be set in either Variable Voltage or Variable Wattage mode.  In Variable Wattage mode, you are able to increase the power output up to 15 Watts - this is considerably higher than most other regulated mods on the market.  Additionally, the Vamo has the ability to run in either short mode with a single 18350 battery or extended with a single 18650 for portability or extreme battery life, and with standard eGo/510 threading, you can do it with any tank you like!  

And don't forget about the resistance meter: your Vamo will be able to read and report the resistance of any atomizer or tank attached.  This is a great feature for advanced users who rebuild their own coils or use primarially rebuildable atomizers.  No need for a separate unit to check the resistance of your new coil, just put it on the Vamo and hold down the right button.

This fully inclusive kit comes with everything you need to jump into advanced vaping:

  • 1 - Vamo V5 body
  • 2 - CE4 atomizer tanks
  • - 18350 battery
  • 1 - wall charger
  • 1 - user manual
  • 1 - gift box

JUST WANT A VAMO V5 BODY?  Here you go! Vamo V5 VV / VW Mod BODY ONLY

Operating specs/features of the Vamo V5:

  • 5 click on/off - press the large button 5 times to turn the Vamo on or off
  • Variable Voltage from 3.0V to 6.0V in 0.1V increments
  • Variable Wattave from 3W to 15W in 0.5W increments
  • Resistance Meter - press and hold right button
  • Battery Voltage Meter - press and hold left button
  • Max Armature Current 5A
  • Reverse battery protection keeps circuit safe if the battery is installed backward
  • Battery Monitoring shuts the unit off once battery has reached end of charge
  • Amperage limiting system protects against over current situations
  • Thermal Monitoring shuts the device off if it detects a high temperature condition
  • Will work with atomizers with resistance of 1.2 - 5.0ohms
  • 10 second cutoff - the device will stop firing if the large button is held longer than 10 seconds
  • OLED screen displays " LO-Ω" if resistance lower than 1.2ohm, "LO-V" if short circuit
  • Works with 1x 18650, 1x 18350, or 2x 18350 batteries

Instructions and Tips from 2vaped:

  • To turn the Vamo on or off, press the large button 5 times rapidly - the screen will display "System:ON/OFF" as appropriate
  • To access Vamo settings: Press and holt both small buttons
  • Toggle between Variable Voltage and Variable Wattage - access settings, press left button on 1. Power Voltage, cycle between Voltage and Power (Watts) output
  • Toggle Mean/RMS mode - Hold left button for 10 sconds (ALWAYS operate in RMS mode)
  • Resistance Meter - press and hold right button


    Battery Voltage Meter - press and hold left button.  Fully charged is 4.2V - Vamo will stop operating at 3.6V

Product Reviews

Find Similar Products by Category